Using Mic Sub Snakes

Here are some tips to simplify your stage and studio wiring

1. Place main stage box (female connector end of main snake) at a stage or studio location which has easy access and good light

2. Run sub snake no. 1 to drum kit from main mic multi cable

3. Run sub snake no. 2 to stage left center for (amps and keyboards) from main mic multi cable

4. Run sub snake no. 3 to stage right center for (amps and keyboards) from main mic multi cable

4. Run sub snake no. 4 to center of front line (front vocal mics) from main mic multi cable

Use short cables from drum mics, backline direct boxes, or front line vocal mics to appropriate sub multi cable

Coil any excess mic cable at the base of each individual mic stand rather at the mic snake or sub snake box. This provides some extra cable in case the stand needs to be moved or the riser cleared to set up a new drum kit.

If you have any questions or concerns, please feel free to contact us by toll-free phone @ 877- 863-6150 or toll-free fax @ 800-327-6651