|
Standard Wiring Procedure for Drum Risers
If you use this numbering protocol for wiring a drum riser with microphone cables, then another sound person can troubleshoot or rewire the riser.
Input 1 |
Kick or bass drum |
| Input 2 |
Snare drum |
| Input 3 |
Hi Hat |
| Input 4 |
Rack tom 1 |
| Input 5 |
Rack tom 2 |
| Input 6 |
Floor tom |
| Input 7 |
Overhead stage left |
| Input 8 |
Overhead stage right |
Coil any excess mic cable at the base of each individual mic stand rather at the mic snake or sub snake box. This provides some extra cable in case the stand needs to be moved or the riser cleared to set up a new drum kit.
Need mic stands for wiring your drum riser. Click on this link for stand recommendations.
If you have any questions or concerns, please feel free to contact us
by toll-free phone @ 877- 863-6150 or toll-free fax @ 800-327-6651
|
